新型煤填充高分子复合材料的研制与应用

根据煤的结构特点,对煤进行闭环的超细粉碎,脱除部分挥发分,表面傅-克烷基化化学改性,与塑料经强制排气式共混,研制了一种新型的煤填充高分子复合塑料母料.将该母料用于聚丙烯,可制得具有较好强度、韧性和优良电绝缘性能的复合材料,在煤含量为20%(质量分数)时,复合材料的拉伸屈服强度大于24.0MPa,缺口冲击强度不小于8.0 kJ/m2;同时,煤/聚丙烯复合材料在较大的煤含量范围内(0%～50%,质量分数),直流绝缘电阻率保持在1014 Ω·cm以上.新型煤填充高分子复合材料在电线电缆中的应用表明,加工性能良好,成品绝缘层力学性能满足标准要求,绝缘性能优良,并可有效降低材料的成本.     

解吸塔换热器706C结堵的原因分析及其对环保装置正常运行的影响

本文详细分析了解吸塔换热器结堵的原因和对环保装置正常运行的影响,并针对性地提出了防范和处理措施。     

Structural Changes in Titin and Nebulin Filaments Specific to Calcium Ions at 0.1 mM: Factors of Meat Tenderization During Postmortem Aging

ABSTRACT Postmortem structural changes in titin and nebulin filaments were investigated by incubating isolated myofibrils in a solution containing 0.1 mM calcium ions and various concentrations of a protease inhibitor. The inhibition curves showed 2 abnormal steps with increases in the concentration of leupeptin or calpastatin domain I. While the amounts of unchanged titin and nebulin were constant in the 1st step, the 2nd occurred at higher protease inhibitor concentrations. These facts indicated that excess amounts of leupeptin and calpastatin domain I caused deterioration in titin and nebulin properties, thus interfering with the binding of calcium ions. We concluded that the severance of titin and nebulin filaments in the 1st step were induced by calcium ions at 0.1 mM.     

单膛石灰竖窑的改造

我厂竖窑容积为250m^3，设计利用系数为0．85t/(m^3．d)。随烧结产量的不断增加，石灰产量已不能满足烧结生产的需要。为了提高石灰产量，进行了扩容改造，容积由原来250m^3增加到298m^3，并针对目前生产实际提出下一步改造设想。     

硫酸锆、碳酸锆的性质、应用及生产技术综述

综述了硫酸锆，碳酸锆产品的性质，生产技术及应用，收集整理了国内外部分厂家和公司该产品的化学指标与生产技术；介绍了“分步液相沉淀法”生产工艺，与“一步法”生产工艺相比，其具有流程短，投入少，操作简单，制造成本低等优点。     

ZL101合金锶变质效果及热处理工艺的改进

对现场生产的ZLl01合金铸件材质进行了全面分析，针对存在的产品成分不准，变质效果不好，力学性能不合格的问题，通过改进合金的锶变质工艺和热处理工艺，改善了合金的组织和性能，达到了对材料的成分、性能的各项要求。     

钛合金植入物材料的表面改性研究进展

简介了钛合金植入物材料的开发及表面改性技术。     

The Bisphosphonate Clodronate Modifying Hydroxyapatite Bioceramics for Bone Scaffold

To investigate the efficiency of clodronate modifying HA bioceramics,and to evaluate the effect of clodronate modifying HA bioceramics on the cells in vitro,clodronate modified the porous HA bioceramics for bone scaffold by chelation .The outermost layer of the specimens was analyzd by XPS and FI-IR ,The depth profile was investigated by the argon-ion sputtering method.The cell culture test was conducted using MC3T3-E1 osteoblastic cells,The cells were inoculated and cultured on the scaffolds.Morphological observation of the cells,MTT test and ALP activity test evaluated the cell attachment ,proliferation and activity on the scaffolds.The cell culture test in cell quantity and morphology indicated active proliferation of the cells on the scaffolds.The ALP activity of the cells cultured for 3d and 7d on clodronate-HA bioceramics was slightly higher than that on HA bioceramics ,but the difference was not signifcant,This result indicated that clodronate-HA bioeramics had favorable cytocompatibility to be used as bone scaffold with potential ability to improve asteogensis.